浙江江山市波恩化工有限公司

名稱Name	用途及特點Purposes and Characteristics	使用方法 Usage
BE金蔥漿 BE glitter paste	主要用在閃光片的粘合上，網印織物圖案輪廓清晰，光亮，柔軟不粘，牢度好。 Mainly used in the flash chip bonding, clear outline of screen printing fabric pat terns, bright, soft and sticky, good fastness.	金蔥漿60%，閃片40%，混合攪勻，就可直接用30-40目網版印刷在織物上，為了使比較薄透的布料不滲透布底，最好用透明漿或者其它漿料打底一次再印閃片，待自然干燥后再以壓燙機或者烘爐機150℃壓燙或者過爐，得出理想的光澤效果。 Glitter paste 60%, flash chip 40%, mix stir and can directly print on the fabric by 30-40mesh screen. In order to prevent the impermeability of thin and transparent fabric, it’s better to bottom by transparent paste or other paste and then print flash pieces. After natural drying, pressing by pressing machine or oven at 150℃ and obtain ideal gloss.
BE金粉粘合劑 BE gold powder adhesive	適用于銅金粉用，抗氧化，不發黑。 Applicable to copper powder, antioxidant, no black.	先按照一定的比例將銅金粉和BE金粉粘合劑攪拌均勻，用40-80目網版印刷。如果想要金粉有更好的水洗牢度，可在漿料中加BE868A-交聯劑1.5%，再晾干后在130℃下烘培3分鐘。 Stir the copper powder and BE gold power adhesive according to a certain proportion and print by 40-80mesh screen printing. If you need better washing fastness of the gold power, you can add 1.5% BE868A cross-linking agent and bake 3 minutes at 130℃ after drying.
BE七彩漿 BE colorful paste	使用于棉混紡織物、絨布的金銀片、鐳射片、七彩片的印花。過往性好、成膜透明、牢度好、金蔥片不易脫落。光澤好、閃爍耀眼。 Use for the printing of cotton blended fabric, velvet gold and silver films, laser films, printing of colorful films. Good past performance, transparent film, good fastness, glitter pieces are not prone to fall. Shiny, glittering	用灑金方法印花工藝應在印好后的織物上立即將蔥片灑下，燙壓防止不需灑金的地方沾上金蔥片。烘培溫度在130-150℃時間為2分鐘。 Immediately sprinkle the slices by sprinkling printing process, pressing to prevent the golden slices on other places. The baking temperature is at 130-150℃, for 2 minutes.

24小時資訊熱線：

0570-4210738/4212038

首頁走進波恩產品中心印花樣板新聞中心聯系我們