浙江江山市波恩化工有限公司

名稱Name	用途及特點Purposes and Characteristics	使用方法 Usage
BE燙金漿 BE gilding paste	適用于各種織物裝飾印花。是一種熱塑型的水性樹脂。光亮度好，手感軟，有立體印制效果。牢度好，不掉光粉。柔軟而有彈性。 Applicable to various fabric decorative printing A water-based thermoplastic resin Good brightness, soft feel, three-dimensional printing effect Good fastness, without the falling of powder	絲網選用50-100目為佳。用絲網工藝，在織物上印花；待漿干后上鋁箔，再經燙壓，即得燙金花紋。鋁箔紙型號自選。 50-100 mesh screen is preferred. Screen process, print on fabric; cover aluminum foil after the drying of paste; the gilding pattern will be obtained after pressing. Optional aluminum model
BE900冷燙金漿 BE900 cold gilding paste	手感柔軟有彈性、牢度好、光亮度好。不粘手、適合壓燙或臺面冷燙。 Soft and elastic feel, good fastness, good brightness Not sticky, suitable for pressing or platen cold wave	絲網選用80-100為佳。印花2-3次，吹干或自然干燥到60%左右，再覆燙金箔漿料表面，用一個不漏漿的網板加入流動性好的水漿或者粘合劑，用比較硬的油性刮刀用力在花位上刮4-5刀，然后撕掉金箔。水洗測試前應確保印花完全干透，否則會影響測試效果。 80-100 mesh screen is preferred. 2-3 times of printing, drying or natural drying to around 60%, and over the hot foil paste; add good mobility slurry or adhesive by a screen without paste leakage, scrap for 4-5 times by hard oil scraper and then tear up the foil. Make sure the printing is completely dry before washing test; otherwise it may affect the test results.

24小時資訊熱線：

0570-4210738/4212038

首頁走進波恩產品中心印花樣板新聞中心聯系我們